Cpcbeta's Album: 100w Led Flood Light Manufacturers

Generally speaking, as a green energy-saving LED luminaire, if the reduction performance test will have a certain degree of instability before use, for example, if the LED luminaire is affected by the environment and the operation is not standardized, then the product will flash, not light, The phenomenon of bad lights makes LED lamps not as long as expected. So how do we prevent the aging of LED lamps? Let's take a look at the 100w Led Flood light manufacturer. In order to prevent and control the quality of LEDs, after the LED lamps are produced into finished products, 100% need to do aging test. The main purpose is to test whether the LEDs are damaged in the assembly process and to check whether the power supply is stable under high temperature environment. The aging test has the flexibility in practical operation to meet the requirements of relevant standards and improve production efficiency. If there is no aging link, the quality of the product cannot be guaranteed, and uncertain factors will appear in the initial stage of the work, which will greatly increase the follow-up maintenance costs and safety accidents. In contrast, the product has passed the professional aging before the factory, and has done a good job of testing and checking, which has improved the performance of the luminaire and greatly increased the stability of the post work efficiency. LED luminaire test standards are divided into the following four types: 1. Do a good job in testing the aging and impact of the drive power supply; 2. According to the batch of LED, sample the high current light decay test; 3. Perform a full set of testing and aging test for more than 24 hours for newly developed engineering products to evaluate stability and service life; 4. For mass-produced products, routine full-scale testing and 6-12 hours aging impact test. information about 100w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/100w-outdoor-slim-led-floodlight-ip65-mars-series.html