Cpcbeta's Album: Led Work Light Knowledge

Proper use of work lights is the best way to effectively extend the life of work lights. The following Led Work Light manufacturers have summarized the following points when considering the actual situation: 1. Use environment: The control of the use environment is very important for the work light. The external light perception of each lamp is different. For work lights, keep them within the normal temperature range as much as possible. You can try to make the most of it and try to avoid unnecessary losses caused by this external factor. 2. Installation method: Install the work light correctly. The so-called correct installation is a comprehensive consideration. First, we must consider whether the lighting range meets the lighting needs and install the work light in the most suitable position. Second, the power of the installation form, the reasonable distribution of the lines, etc. At the same time, if the first installation is not good, it will have a great impact on the remaining progress. 3. Cleaning and maintenance: The necessary cleaning is an essential part of maintaining the work light, including reasonable wiping, internal circuit detection, and reasonable replacement of circuit switches. These are all reasonable to ensure that the work lights are working as possible. premise. 4. The maintenance cost of the work light is very low, especially the LED work light, maintenance is almost unnecessary. It only needs to be installed correctly. Wipe regularly to check that the circuit and switch are normal. Many work lights now have an IP65 rating and can be used in extremely harsh environments. As long as you regularly wipe and check the switches and circuits, you can maximize their effects and even extend their life. After 10 years, the service life of up to 50,000 hours is almost equivalent to the service life of the mechanical equipment itself. This is a real "special light". information about Led Work Light : https://www.xiangruilight.com/product/led-work-light/